This site uses cookies to offer you a better browsing experience. By continuing to navigate through this site or by clicking Approve, you consent to the use of cookies on your device as described in our privacy notice.
BOX COMPRESSION TESTER
BOX COMPRESSION TESTER
BOX COMPRESSION TESTER
BOX COMPRESSION TESTER
BOX COMPRESSION TESTER
BOX COMPRESSION TESTER

BOX COMPRESSION TESTER

Box compression tester with integral Pc and software dedicated to testing corrugated board boxes and cartons.

CONSTRUCTION

Rigid Moving platen driven by 4 recirculating ballscrews. Platen parallelism better than 1:4000. Load readings are taken from an average of 4 balanced load cells to compensate for the effect of any off centre loading.

FORCE MEASUREMENTS

Universally Calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum. Automatic identification of load cell. Resolution 1 part in 500000 with autoranging. Electronic load cell protection.

Enquiry

STANDARD MODELS

  • 1kN
  • 2.5kN
  • 3kN
  • 5kN
  • 10kN
  • 20kN
  • 25kN
  • 30kN
  • 50kN
  • 100kN

FLOOR STANDING MODELS

  • 100kN
  • 150kN
  • 300kN
  • 500kN
  • 600kN
  • 1000kN

BOX COMPRESSION

Small box compression Box compression

SPECIALS FRAMES MODELS

  • Dual & triple Systems
  • Long frame
  • Wide frame
  • Horizontal tester
  • Multi station

SPECIALS MODELS

  • Fibre & micro
  • Foam Seat Tester
  • Glass Tester
  • Large sheet Tester
  • Spring Tester

EXTENSION MEASUREMENTS

Full frame length to 0.001mm. Resolution 0.001 min. Accuracy 0.01mm. Absolute, relative and auxiliary modes mm, inch and percent. Programmable extension limits.

SPEED CONTROL

Drive system temperature and current protection. Positional jog speed 0.001mm/min to maximum. Speed setting increments 0.001mm/min.

LOAD FRAME

Rigid frame, using dual slide crosshead guidance system and rigid extruded support column. Frame stiffness 5kN/mm plus K factor facility built-in. Re-circulating ball screw with bellows. Electronic limit trips, total travel trips and customer programmable safety stops. Rubber mat front protection.

SOFTWARE

Comprehensive winTest™ Analysis universal windows software covering tensile, compression, peel, shear, tear, cyclic, creep and multi stage testing. It includes a wide range of industry standard test methods and facility to create and store an unlimited number of further test methods. There is automated storage of all test data and ease of export to other software packages such as word, excel, access and SPC systems for enhanced report generation.

Contact Us at +9714 2152799

We can help you with a solution tailor to your specific need.